Grand Theft Auto IIi ( Abbreviated Iv ) - 919 Words

Video games have been enjoyed by millions of gamers for decades, and the industry is wildly popular. Video games are a great way for a person to sit back and relax and to have fun doing it. In 2001, a game designing company known as DMA Design (now Rockstar North) changed the video game industry forever with the release of Grand Theft Auto III (abbreviated as GTA III). Grand Theft Auto III was one of the most influential video games because it was the first massively popular game to include a fully explorable open world, combine many different video game genres into a successful game, include a wealth of content, and spawn countless â€Å"sandbox† games that attempted to recreate GTA III’s success. No product can succeed in the market without proper marketing and exposure. Grand Theft Auto III was very controversial, as it included swearing, violence, prostitutes, and more. It received a lot of backlash and criticism from the media, but that only led to its increased po pularity among gamers (Leigh). GTA III’s media exposure is a part of what made it so popular, and that is what led to its large influence on the video game industry. While it was not the first game to include an open world, Grand Theft Auto III was the first game to include a fully explorable open city on a large scale. In addition to the open world, players were not forced to mindlessly complete mission after mission until finishing the game and letting it collect dust on the shelf. Instead, GTA III allowedShow MoreRelatedMarketing Management130471 Words   |  522 Pagesduring a given time period; and †¢ GNE – Sum of all that is spent of currently produced goods and services by all types of buyers in an economy during a given period. Thus, national income can be measured by either of the three ways : (i) (ii) (iii) as an aggregate of goods and services produced during a year; as an aggregate cost of factor services in the economy during a year; or as an aggregate of expenditure on consumption, saving and investment during a year. The national income data canRead MoreManaging Information Technology (7th Edition)239873 Words   |  960 PagesSTUDY III-1 Managing a Systems Development Project at Consumer and Industrial Products, Inc. CASE STUDY III-2 A Make-or-Buy Decision at Baxter Manufacturing Company CASE STUDY III-3 ERP Purchase Decision at Benton Manufacturing Company, Inc. CASE STUDY III-4 The Kuali Financial System: An Open-Source Project CASE STUDY III-5 NIBCO’s â€Å"Big Bang†: An SAP Implementation CASE STUDY III-6 BAT Taiwan: Implementing SAP for a Strategic Transition CASE STUDY III-7 ARead More_x000C_Introduction to Statistics and Data Analysis355457 Words   |  1422 Pagesgoing to school and collect data on family income, savings, and expenses. The resulting data are used to set criteria for deciding who receives ï ¬ nancial aid. Are the estimates they use accurate? Insurance companies use statistical techniques to set auto insurance rates, although some states restrict the use of these techniques. Data suggest that young drivers have more accidents than older ones. Should laws or regulations limit how much more young drivers pay for insurance? What about the common practiceRead MoreLogical Reasoning189930 Words   |  760 Pagesupdated: April 26, 2016 Logical Reasoning Bradley H. Dowden Philosophy Department California State University Sacramento Sacramento, CA 95819 USA ii iii Preface Copyright  © 2011-14 by Bradley H. Dowden This book Logical Reasoning by Bradley H. Dowden is licensed under a Creative Commons AttributionNonCommercial-NoDerivs 3.0 Unported License. That is, you are free to share, copy, distribute, store, and transmit all or any part of the work under the following conditions:Read MoreStephen P. Robbins Timothy A. Judge (2011) Organizational Behaviour 15th Edition New Jersey: Prentice Hall393164 Words   |  1573 PagesView of Conflict 447 †¢ The Interactionist View of Conflict 447 †¢ Resolution-Focused View of Conflict 449 The Conflict Process 449 Stage I: Potential Opposition or Incompatibility 450 †¢ Stage II: Cognition and Personalization 451 †¢ Stage III: Intentions 452 †¢ Stage IV: Behavior 454 †¢ Stage V: Outcomes 455 Negotiation 458 Bargaining Strategies 458 †¢ The Negotiation Process 463 †¢ Individual Differences in Negotiation Effectiveness 464 †¢ Third-Party Negotiations 467 Summary and Implications for Managers

Youth Groups As A Discourse Community - 2280 Words

Youth Groups as a discourse community The only people who go to youth groups are the perfect kids who never do anything wrong, go to church every week, talk about God and about what is going on in their lives. This was my speculation before attending Pinion Hills Community Church in Farmington, New Mexico. Many people believe this to be a stereotype but my guess is that it is anything but the truth. Pinion Hills is a non-denominational church with a youth group that takes place on Saturdays at five thirty in the afternoon and then again on Sundays at nine thirty in the morning. I chose to attend the Saturday youth group with my roommate who has attended the youth group for a little over a year now. Christianity began over 2000 years ago with Jesus Christ and his disciples. Jesus would travel around the village’s preaching religion and teaching people the will of God. Jesus would eventually die for the sins of man but three days later he would be resurrected and give hope to the world. Jesus became known as the Messiah for the Christian religion as well as the teacher of God. People today continue to tell his stories and worship him still to this day. There are various ways that people come together to worship and praise God. One way would be the getting together of youth groups since it allows the youth to learn about God in a more modern and fun way. METHODS There are many different ways that I went about collecting my information and data on youth groups. InterviewsShow MoreRelatedThe Franklin Road Church Youth Groups Are More Than Just a Religion1681 Words   |  7 PagesFranklin Road Church of Christ youth group consists of youth of all ages. The group is divided into three subgroups: Tots for Christ (TFC), Kids for Christ (KFC), and the Senior Youth Group (SYG). In particular, for this essay I will be explaining how the Senior Youth Group is a discourse community. Franklin Road’s SYG consists of the ages 11-18. Within the group we do various things such as going to youth retreats, youth conferences, and many more; just to name a few. The group has been around for manyRead MoreFunctions Of A Discourse Community1511 Words   |  7 PagesDiscourse communities are all around us, which can include a sports team, academics, and many others. However today I am focusing on a discourse community that relates to my major, criminal j ustice. In order for me to understand swales six characteristics I interviewed a homicide detective relating to criminal justice. A discourse community is a group of people involved in and communicating about a particular topic, issue, or in a particular field. A discourse community is defined by six characteristicsRead MoreThe Discourse Community : Bethel Worship Group1337 Words   |  6 Pagessafe community, the Discourse Community serves a place to build trust, respect, and communication skill. According to Merriam Webster dictionary, the word discourse means to express oneself especially in oral communication. Discourse community should be a place where one can live comfortably as it own self and not concealing its’ negative side. It should be a place where everybody treated each others like a family and where one can express its true feeling. Bethel Worship group is a community thatRead MoreCorporate Social Responsibility of Sime Darby838 Words   |  4 PagesSime Darb y Berhad. | |Although the foundation receives funds from the Sime Darby Group, decisions on its activities are made independently by the Council of | |Yayasan Sime Darby. | |The foundation that has been active since November 2008. It works closely with the Sime Darby Group and its Divisions in areas of common | |concern. The foundation supports initiativesRead MoreIs The Memphis Youth Symphony? A Discourse Community?1776 Words   |  8 PagesDiscourse communities are all around us—we all belong to a discourse community. A discourse community is a body of persons who share common and unique modes of communication or discourse (â€Å"Discourse Community†). In order for a community to identify as a discourse community, the community must possess six defining qualities that categorize it as a discourse community. As defined by John Swales, a researcher and professor of linguistics, discourse communities â€Å"have a broadly set of common public goalsRead MoreThe Box Acts As A Representation Of Adolescents1025 Words   |  5 Pages Since all Gladers are males, they are surprised when Teresa arrives. However, to their surprises, she displays masculine traits that demonstrate her ability despite her biologically feminine body. These attributes allow her to be included in the group , to some extent. Since gender, as discussed, is a learned social construction, Teresa might have learned these behaviors from the Glade filled with males. Nevertheless, masculinity allows her to protect herself from harm and contribute a huge aspectRead MoreThe Defective Pancreas Community1041 Words   |  5 PagesThe Defective Pancreas Community According to Swales, a discourse community is made up of individuals who share a set of common public goals, has mechanisms of intercommunication among its members, uses its participatory mechanisms primarily to provide information and feedback, has and uses one or more genres that help the community achieve its goals, has acquired some specific lexis, and has a reasonable ratio of novices and experts (220-222.). Even though that may seem like a large number of requirementsRead MoreLife As A Social Worker1574 Words   |  7 PagesLife as Social Worker Growing up, I would watch the people in my community. I picked up on the things we considered to be socially acceptable. My community is predominantly filled with Latino and African American culture. Though, both come from two different ethnic groups, beliefs and practices, they share a common socioeconomic factor. I remember observing the gang violence, prostitution, drug and alcohol abuse, and children wandering the streets. Most people coming from a higher income statusRead MoreThe Toronto Anti Violence Intervention Strategy1564 Words   |  7 Pages This basis of legitimacy is partly due to shared factors contextualized by authorities and institutions that play a critical role in identifying risk factors linked to youth offending. Part of this involves linking violence, with sociological constructs (e.g., personality characteristics, neighbourhood characteristics, immigrant concentration). For instance, Papachristos, Meares, Fagan (2012) propose that young people from neighborhoods saturated with criminal associates and opportunities forRead MoreMinimum Legal Drinking Age : A Discourse Appraisal1452 Words   |  6 PagesMinimum Legal Drinking Age in America: A Discourse Appraisal You know an issue has evoked large levels of community discussion when interest groups such as Mothers Against Drunk Driving and rappers like J-kwon are telling us the same thing: teen drinking is very bad. But discussion on the topic tends to vary far more than that. Congress discussed the issue in 1984, with the National Minimum Drinking Age Act: an act that withheld federal highway funding from states without a minimum legal drinking

Features of Spoken Language Free Essays

There are many aspects of spoken language that I have used in my home. When I am speaking to a person with a higher position is society, I will greatly vary my speech in terms of my vocabulary and even reduce or abolish the use of less formal features such as fillers and acronyms. However whilst I am conversing with a person of my age or a similar position in society, I will greatly use informal features such as tag questions and ellipsis. We will write a custom essay sample on Features of Spoken Language or any similar topic only for you Order Now In my informal conversation with the plumber, I have used an array of spoken language features such as acronyms, hedge words and even ellipsis however on the other hand, whilst conversing with my father, I have employed covert prestige so that he understands me better. In addition I believe that spoken language is different from written language because most written language is intended to be read by someone who is separated from the writer in space and time. Therefore to communicate successfully, it has to be a lot more explicit than spoken language used in a face to face conversation. Although some written genres such as texts and e-mails are very similar to spoken language, in general written language is more dense in the sense that bigger words are used in smaller spaces and it also uses more subordinate clauses and has less redundancy words like †sort of†, †like†, †you know†, †yeah? † which are dominantly found in spoken language. Spoken language tends to be full of repetitions, incomplete sentences, corrections and interruptions, with the exception of formal speeches etc. Also, Writers receive no immediate feedback from their readers, except in computer-based communication. Therefore they cannot rely on context to clarify things so there is more need to explain things clearly and unambiguously than in speech, except in written correspondence between people who know one another well. On the other hand, speech is usually a dynamic interaction between two or more people. Context and shared knowledge play a major role, so it is possible to leave much unsaid or indirectly implied. There are many factors that affect the way I speak or my idiolect. I think that I speak in a slightly informal way and use a lot of slang vocabulary in my speech. This might be related to my family background and also because I come from an under-privileged position in the society where people tend to place a greater emphasis on delivering the message than focusing on the presentation. In addition, my background and lifestyle also affects my idiolect because, I come from an ordinary working class background where, people are not formally educated, so they tend to used words that are not complicated because a person’s speech usually reflects upon their education. My personal experiences also affect my idiolect in the sense that I am a very sporty person and love games by heart. This tends to affect my vocabulary because I use a lot of technical terms which an uneducated person might not understand straightaway furthermore, I have only been attending school since year 5, this places me in a very difficult position because I sometimes cannot find words that match my emotions because I have not been educated up to a high standard. My friends also influence my idiolect because I tend to socialise with people that have a similar intellect and interests as me. This greatly affects my vocabulary because we use similar terminology that a different person might not understand. In addition, my vocabulary is greatly affected by my interests too, for example when I read a book; I will try to incorporate the words into my speech so that I will have more breadth of words and lingo. I have recorded myself conversing with two different people that have different positions in society and are also educated to different levels. This greatly affected the topics that we spoke about and also affected the vocabulary I used. In the informal transcript with the plumber we are discussing about the replacement of a pipe and a tap, on the other hand the formal conversation with my dad was about going to a football match. Both of the conversations follow Grice’s maxims in the sense that the replies are short and have a good manner. However, the structure of the conversation is very different because in one I am more comfortable and open up and in the other, I need to persuade my father so I need to use my best vocabulary in order to be manipulative. Whilst looking at the transcript with the plumber in an informal situation, I immediately realise that I have a tendency to talk and give suggestions whilst the other person is still speaking, this is evident in the transcript because the topic of discussion was very mundane and did not contain anything educational so I felt that there was nothing for me to learn so why not present a quick reaction and agree with what the other person is saying. This adds emphasis to the point that peers do not mind if they are cut in between because of the informality of the situation. It also suggests that the two peers share a bond in the sense that they do not mind and will forgive the other person who has intruded in what they were saying. This might suggest that the people who usually employ such methods come from a background where this is seen as acceptable whereas formally educated people or people with a higher position in society will usually wait for their turn until the other person has finished speaking and follow the feature of turn taking which is evident in the formal transcript because it is seen as impolite to interrupt. People usually look down upon a person who employs this tactic because the person assumes a higher intellect than the person they interrupt because they don’t wait for them to finish their sentence, people who employ this technique might also come off as over-confident or over-smart. As the situation was very informal and relaxed, we could relate and form a bond of compassion where I do not need to be overly formal or employ formal features such as Standard English because we can relate in terms of background etc. This proves the point that I was able to successfully manipulate my speech depending on the situation and the person who I am speaking with. In addition to having lots of interruptions, the informal conversation contains lots of acronyms and initialisations such as â€Å"I gotta leave ASAP† and â€Å"LOL, that’s funny cos’ my friend goes to Copland†. This suggests that the situation is very hasty and I have employed this feature in my speech to reduce the time it takes to deliver a message. By, using â€Å"ASAP† in my speech, I was able to emphasise the hastiness of the situation and was also able to show wariness of the change in language over time. I have employed this feature because I would like to fit in with the way my peers speak to avoid social exclusion where no-one understands what I am trying to imply. This feature is extensively used in my and the plumber’s idiolect for convenience because we would like to deliver a longer message in a shorter amount of time without losing the importance of the message. In formal situations, people will usually keep acronyms as their last resort because it shows that a person is too lazy to finish their sentence which might be perceived as not being confident enough. However, it shows that a person is aware and embraces change in the English language, for example people who use Received Pronunciation, can be seen as ignorant or unaware of the changes that English has had to suit convenience. How to cite Features of Spoken Language, Papers

1901 and Key Features free essay sample

Homework: Writing skills Name: Bui Thi Ha Thu Task 1: The graph and table show the number of fishers in millions for different regions between 1970, 1980 and 2000, and the world’s top ten exporters of fish in 2000. Summarize the information by choosing and reporting the key features, and make any relevant comparisons. The bar graph and the table indicate comparisons of millions of fishers in 5 regions in the world between 1970, 1980 and 2000 and the world’s top ten exporters of fish in 2000.As is illustrated by the bar graph, millions of fishers reveal the most significant amount in Asia while the lowest amount of fishers is showed in Europe throughout three periods of time. The largest amount represents 24 millions of fishers in Asia in 2000 and the least one represents only 0. 3 millions of fishers in Europe in 1970. The level of Asian fishers dramatically rises up whereas the others seem stay the same. While the number of fishers was only 9 millions in 1970 this figure had more than doubled in 2000. We will write a custom essay sample on 1901 and Key Features or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page When others illustrated fluctuations of the total fishers, South America remained unchanged its stability of 1. 2 millions of fishers during three years. Turning to the table of exporters, Thailand stands at the first position among top ten exporters of fish in 2000. Norway and USA also obtain high levels when they occupy the second and the third stands respectively. After these countries, China, Denmark, Canada, Taiwan, Russia, Indonesia follow to take up from the fourth to the ninth levels in turn.South Korea is ranked the tenth position at the bottom of the table. (219 words) Task 2: The two graphs below show the percentage of smokers and the consumption of alcohol in litres in selected countries, for the period 1960-2000. Summarize the information by choosing and reporting the key features, and make any relevant comparisons. The two graphs represent comparisons the percentage of smokers in the population every day in USA, Japan, Holland and alcohol consumption in liters per person among Turkey, Holland and USA from 1960 to 2000.As can be seen from the first graph, 3 countries of the survey indicated a downward trend in percentage of smokers from 1960 to 2000. Holland revealed the highest level while USA stood the lowest percentage of smokers. In 1960, Holland represented 59% of smokers while USA represented 40% and in 2000 Holland showed 32% of smokers while USA indicated 19%. From 1960 to 1970, the percentage of Holland smokers remained unchanged at 59% during which Japan and USA dropped very slightly from 49% to 48% and from 40% to 39% respectively.Holland represented a dramatic change during 1970s when its smoker percentage slumped sharply from 59% to 44% in between 1970 and 1980. From 1980 to 2000, Holland and Japan seemed decline slowly at the same level. The gaps of percentage between Japan and USA seemed stay unchanged about 10-12% from 1960 to 2000. It can be clear from the second graph that 3 countries rose up to the peak of alcohol consumption in 1980. Holland represented the highest level of 11. 3 lirters/person while USA and Turkey represented the second and the third at 10. 1 and 1. 9 lirters/person respectively in 1980.Holland revealed a dominant increase of alcohol consumption while others showed a gradual one from 1960 to 1980. During this time, Holland shot up from 3. 9 litres/person in 1960 to the peak of 11. 3% in 1980. If USA showed the highest level of alcohol consumption in 1960 , Holland prevailed above 3 countries from 1980 at to 2000. Turkey reveals the lowest alcohol consumption when it represented the significant gaps among the others. Especially the graph showed the gaps of 9. 4 litres/person between Turkey and Holland in the pinnacle of 1980. (315 words)

Watergate and American Foreign Policy free essay sample

An analysis of how American foreign policy caused and was affected by the Watergate scandal. This paper examines the Watergate break-in scandal in 1972. The author discusses the political motive behind the act, the figures involved in the scandal, and attempts to understand why President Nixon would authorize the illegal act and jeopardize his future. The cause of the Watergate scandal lays in the split between the containment and new world order factions within the Nixon administration. Through 1972, Richard Nixons presidency had been a successful one. He had begun to remove the United States from Vietnam , opened relations to China , achieved detente with the Soviets, and brought the allies back under tighter control through higher energy prices, all of which helped strengthen containment. Henry Kissinger and the other members of the Rockefeller establishment needed to find some way to gain leverage over Nixon in order to promote their new world order agenda. We will write a custom essay sample on Watergate and American Foreign Policy or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page Watergate would become their tool for wresting power from Nixon and changing the grand strategy of American foreign policy.

Jefferson on Slavery essays

Jefferson on Slavery essays Thomas Jefferson was born on April 13, 1743 in Albermarle County, Virginia, inheriting from his father, some 5,000 acres of land, and from his mother, a Randolph, high social standing. He attended the College of William and Mary where he studied law. In 1772 he married Martha Wayles Skelton, and took her to live in his partly constructed mountaintop home, Monticello. Jefferson achieved several accomplishments throughout his lifetime. At age 33, he drafted the Declaration of Independence. In years following, he labored to make its words a reality in Virginia. Most notably, he wrote a bill establishing religious freedom, enacted in 1786. He succeeded Benjamin Franklin as minister to France in 1785. As a reluctant candidate for President in 1796, Jefferson came within three votes of election. Through a flaw in the Constitution, he became Vice President. In 1801 Jefferson assumed the Presidency. Once in office, he slashed Army and Navy expenditures, cut the budget, eliminated the tax on whiskey, yet reduced the national debt by a third. He also sent a naval squadron to fight the Barbary pirates, who were harassing American commerce in the Mediterranean. Further, although the Constitution made no provision for the acquisition of new land, Jefferson suppressed his doubts over constitutionality when he had the opportunity to acquire the Louisiana Territory from Napoleon in 1803. During Jefferson's second term, he was increasingly preoccupied with keeping the Nation from involvement in the Napoleonic wars, though both England and France interfered with the neutral rights of American merchantmen. Jefferson's attempted solution, an embargo upon American shipping, worked poorly and was very unpopular. When Jefferson was born in 1743, slavery had existed in Virginia for nearly 75 years. He grew up on a plantation with enslaved workers, and as an adult, owned nearly 200 slaves. Jeffersons views on slavery and blacks are co...

The Beveridge Approach versus The Workfare Approach Essay

The Beveridge Approach versus The Workfare Approach - Essay Example Nevertheless, it is cautioned that matters are not that straightforward. Often left-wingers favour practices that disable institutional support that may affect their broader ideology and there are right-wingers who may favour it as it positively affects their broader policies. This is only a particular instance. (An Introduction to Social Policy, Undated). In November, 1942, Sir William Beveridge presented his report entitled "Social Insurance and Allied Services" to His Majesty the King. In it he mentioned that there were three guiding principles that he had used to formulate his policy of public social service. These are as follows. Sir Beveridge asserted that any experiences gleaned in the past must be used to build opportunities to the future. Such experience should not be restricted on the basis of any sectional interests vested in its gathering. He personally remarked of this - "A revolutionary moment in the world's history is a time for revolutions, not for patching." (The Beveridge Report, 1942) The second principle cautioned that the organisation of social insurance should be treated as only a part of overall social progress. This was so because social insurance aimed at negating all want in the British people. Sir Beveridge cautioned that 'want' was only one aspect of the reconstruction that was then necessary to put the British Empire back on its feet after the war. The other four were - disease, ignorance, squalor and idleness. Then third principle was that social security w3as to be achieved by co-operation between state and individual. The state would offer security for service and contribution. It would organise security but not stifle incentive, opportunity and responsibility. It would establish a national minimum but it would leave room and encourage voluntary action by an individual to procure more than that minimum for himself and his family. (The Beveridge Report, 1942)New Labour's Welfare Policy When the 'New Labour' Party came to power in Britain in May, 1997, it did so with a considerably changed economic manifesto from its previous stint which immediately preceded its re-election. Under Tony Blair, the new labour economic policy was strongly oriented towards the supply side and the welfare state was intended to exist on the basis of steady employment provided by the pull of demand. All these changed policies were meant to

Biochemistry - How BSE Occurs at a Molecular Level Coursework

Biochemistry - How BSE Occurs at a Molecular Level - Coursework Example Toxicity: Large amounts of phenylalanine taken in the form of nutritional supplements elevate blood pressure. Symptoms such as headaches, heartburn and nausea may be experienced. In addition, the nervous system is usually affected by the toxicity of phenylalanine. Reactivity: Phenylalanine is a hydrophobic amino acid with an aromatic side chain. Therefore, it is fairly unreactive and mostly takes place in substitution reactions where it is interchanged with amino acids of a similar nature. Consequently, it plays a key role in substrate recognition rather than in protein function. Hydrogen bonds: Hydrogen atoms from the amine groups are pulled towards the electronegative carboxyl groups leading to sharing of electrons. The repetitive nature of such attractions within the protein structure confers stability. Van der Waals forces: Interactions among induced dipoles that form from the changes in charge density that occur in adjacent atoms that do not necessarily form a bond constitute attractive van der Waals forces. Repulsive forces, on the other hand, entail interactions between atoms that come close to each other but do not form dipoles. The huge numbers of such forces within the structure of proteins affect the stability of proteins. When certain proteins fail to fold in the required way, they begin to cluster and form aggregates. These aggregates contain certain polymeric structures such as beta sheets. In BSE, these aggregates are in the form of prions, which get into the brain and cause disease. Prions are proteinaceous infectious particles that comprise aggregates of misfolded proteins. Prions alter the structure of the brain by stimulating the formation of ‘holes’ in the brain, which ultimately give the brain a spongy architecture. Consequently, the nervous system is affected making the cow behave abnormally.  Ingestion of prions present in contaminated food causes them to be taken up into the body.  Ã‚  

The Clash of Civilizations and the Remaking of World Order Essay

The Clash of Civilizations and the Remaking of World Order - Essay Example He avers that the secular ideologies are facing a new, serious threat of violence. The origin of this hidden volcano is between countries and cultures that base their traditions on religious faith and dogma. These limited numbers of cultures have taken the center stage to influence and dominate the important events that have serious bearings. They are Western, Eastern Orthodox, Latin American, Islamic, Japanese, Chinese, Hindu and African. Huntington argues, policymakers should take notice of this development, while trying to interfere in the internal affairs of another country. Rebuking U.S. in this regard Huntington says, â€Å"In the emerging world of ethnic conflict and civilizational clash, Western belief in the universality of Western culture suffers three problems: it is false; it is immoral; and it is dangerous . . . Imperialism is the necessary logical consequence of universalism.†(Huntington, 1998, p.310) What is the latent psychology of these cultural civilization groups that are part of a Nation? Is this civilization identity conflict-oriented or friendship-oriented? Are they wiling to live in mutual co-operation or with hidden grudges? Is living together as democratic citizens of one country are an act of compulsion? â€Å"For the first time in history global politics is both multipolar and multicivilizational; modernization is distinct from Westernization and is producing neither a universal civilization in any meaningful sense nor the Westernization of non-Western societies.† (p.20) The valley of these civilizations as perceived by Huntington is not all green! His forthright views merit serious consideration, in the light of what actually is happening all over the world, especially in Muslim countries, and the countries suffering from Muslim factor. According to him modernization does not mean westernization. Economic progress clubbed with revival of religion is a dangero us combination. The

The New Hydraulic System Engineering Essay

The New Hydraulic System Engineering Essay The major aim of the project is to investigate about the new hydraulic system of a380 and the reasons for increasing the hydraulic pressure from 3,000 psi to 5, 000 psi. The project is also intended at discussing and investigating about the new electro- hydrostatic actuators which uses this high hydraulic pressure. This report emphasiss on how this hydraulic system with 5,000 psi works and how it is better than previous hydraulic system. Saving Weight is the major reason for using 5000 psi hydraulic system in a380. By using higher pressure and smaller volume of fluid though the pipe of smaller radius, saves tonne of weight throughout the aircraft. Earlier used in military aircraft, this 5000 psi hydraulic system helps to reduce overall weight of the aircraft by reducing size of pipelines and other components. Fig.1 Kevlar hydraulic hoses, used for carrying high hydraulic pressure in A380. (eaton, 2006) Architecture of a380 hydraulic system differs extremely from other aircrafts, it uses pipeline specifically made of titanium and eight de- clutchable hydraulic pumps being used to achieve this high pressure of 350 bars. Also hydraulic power packs serve as backup for primary systems, instead of secondary hydraulic system which reduces maintenance and save weight. The very obvious reason that come to mind for using an enormous 5000 pounds per square inch seems to be the fact that there is need of massive power needed to fly the giant A380. But there is a lot more to it. The technical reason for that is the weight saving that the designers envisaged. In conjunction to the principles of physics, the pipelines of the hydraulic system have been designed to a smaller diameter as opposed to those used in other wide bodied aircraft, like B 777 in close enough range of A 380. As we know Force = A * P Where A is the cross section area and P is the pressure exerted by the hydraulic fluid Smaller diameter of pipelines enables greater hydraulic pressure to be exerted. Thus apart from giving enough power to drive the controls, it also provides the adequacy for lightweight components though they needed to be stronger. So this reduces overall weight of the aircraft. The way A380s hydraulic system is designed is completely different from those of others. The fact that its piping system is specifically made of titanium. Eight hydraulic pumps that are clutch able add to the extraordinary feature of this beautiful machine. Also, power packs that are driven hydraulically provide back up for the main hydraulic system. His eliminates the need for a secondary system that is normally implemented for redundancy. Here we see an intelligent application of a really appreciable weight reducing technique. This not only saves weight of the aircraft, but also takes a leap across in the world of engineering, in aircraft manufacturing and provides a base for producing aircrafts with such excellent duplicity in designing power store for possibly bigger aircrafts. Assuming the A 380 was made with the conventional 3000 psi, it is logical to say that the overall size of the now a380 would have been much bigger. As the experts say, an A380 with a working pressure of 3000 psi would have a nominal diameter of more than 3 inches as opposed to nearly 2 inches which is the actual. The reason as discussed before is the bigger size of the hydraulic components and the pipelines. This in turn would have demanded bigger housings and heavier mountings for a robust structure. Moreover the fittings that join these components would obviously be proportionally bigger and thus adding to weight of the aircraft. All this idea of weight saving methods has been targeted to the profits that the air carriers would yield in the long run. It translates to having bigger payload capacity that generates more revenue for the business involved. The hydraulic pump is located on the engine gearbox that runs on the mechanical power provided by the engine and turns it into hydraulic power. This hydraulic force of the fluid is exerted to the flight control surfaces like the rudders, ailerons, flaps, elevators. Transformation of the hydraulic energy into mechanical energy is felicitated by electro hydraulic actuators, which is another key feature in the making of A 380. These electro hydraulic actuators are driven through electrical power available from the aircraft generator or the TRUs (transformer rectifier units). They have got electro hydraulic static valves. Figures reveal the advantageous design better. As we know from the mathematical relation, Power = C * P Where C is the volumetric flow rate and P is the pressure exerted. A constant power output would imply change in either of the quantities, i.e. force or pressure. Therefore an increase in pressure would lead to reduction in the rate of flow of the fluid, which is about 40% in A380s case. Consequently, the flow rate in the 5000 psi system is about 42 gallons per minute which in a hypothetical 3000 psi system would have been 70 gallons per minute. So clearly we see a remarkable difference in the amount of fluid flowing per unit time in this instance. But considering the size of A380, this would not have been feasible like it is in case of other aircraft, or even for that matter the jumbo jet B747. Airbus successfully achieved an appreciable 20% reduction in the weight by switching to more pressure and lower flow rate that very well suited to a system that involve figures about masses and quantities, precisely 2500 pounds of weight. But, the only drawback for using this 5000 psi is that the components are not available easily. Invention of hydraulic power generation system Apart from the aviation industry, there are not many  industries  that put emphasis on ways of weight reduction. In an industry of commercial aviation,where  the sole source of profits are the flying machines. To make that happen effectively efficiently and economically, there is constant research and development going on throughout the world to develop new technologies and devise new methods of advancement in the field. Every ounce of weight of the mass of the aircraft  would  imply an extra amount of fuel to be consumed. Thus in an effort to reduce the weight and amplify the power to mass em and ultimately increase profits, Airbus endeavoured to save weight of A380.   A hydraulic system with an operating pressure of nearly 5000 psi is not the latest trend though. Since 1970s, military  aircraft  of sophisticated kind have been using such a mean pressure, but with the advent of the giant beauty, it is the first time that such high a pressure has  been  used in passenger aircraft, against the  conventional  3000 psi hydraulic systems, obviously with the exception of Concorde which featured a 4000 psi system. Components that are used in such military air machines need to be light weight as well as strong enough to handle such fluid  conditions. Similar requirements were demanded by the  design  of A380.   When the bright idea of building the worlds largest commercial carrier  was still on paper, Airbus did know that weight and volume of the structural parts and components involved would be the most critical factor in practical. Engineers and designers pondered upon the expertise that would go into it and discussed the latest hydraulic system technologies. These co-ordinated efforts led to a plateau phase that lasted four months, in which the criteria and the specifications of the components and materials involved were developed. The outcome was that the trade of fuel distribution  system  and the hydraulic power generation system was ultimately given to Eaton Corporation.   A380 HYDRAULIC SYSTEM BLOCK DIAGRAM As compared to other airbus hydraulic system, this A380 got only two hydraulic systems i.e. green and yellow, replacing the third hydraulic system by electro- hydraulic system which comprises of EHA and EBHA. fig.2 block diagram (eaton, 2006) A380 HYDRAULIC AND ELECTRIC POWER SOURCES fig.3 hydraulic sources (tron, 2007) electro hydrostatic actuators fig.4 electro hydrostatic actuators (tron, 2007) EHAs are electrically operated actuators, which replaces the third hydraulic system in an aircraft, thus it simplifies the aircraft architecture and makes it more reliable. It has an advantage of storing the pressure internally, when there is no movement in the motor, thus it reduces the power usage. WORKING AND CONSTRUCTION OF THE SYSTEM   It is the first time in the civil aviation history that flight actuators are incorporated that are powered solely by electricity that give back up to the  hydraulic  powered flight control actuators. When required they augment the primary  actuator. They contain their own hydraulic  and electrical supplies.   For aileron and elevator  movement  EHAs or Electro- hydrostatic actuators are used. For rudder and spoilers movement they are used as EBHAs Electrical back up hydrostatic actuators.   As the pressure has increase from 210 bar (3000 psi) to 350 bar (5000 psi), this has led to thinner pipelines being used. The conventional metal to metal fittings have been replaced by isomeric sealing which bind the metal chemically. Tests have proved that such high pressure would not degrade any chemical or physical property of the fluid, with an added advantage of saving about a metric ton! Hydraulic system of A3809 consists of eight Vickers PV-300-31 hydraulic pumps that are engine driven and are of variable displacement type that have a displacement that deliver at a  rate of 42 gallons per minute at 3775 revolutions per minute. Their displacement is  47 ml per revolution There are two unique features that set this kind of pump apart from traditional type of hydraulic pumps. Firstly, the disengagement clutch that is not found on any of the other commercial or military aircraft. For instance, if any of the eight pumps is not working, it can be de clutched or separated from the system. Then the pump cannot be engaged, with the exception on ground that too by manual means. The second important characteristic of this kind of pump is pressure pulsation. Generally, there are pressure fluctuations n a pump, typically about 10%.] I.e. The value of the pressures generated can vary to about 10% above and below of the nominated value. Even in recent models, this pulsation is about 5%. But Airbus wanted the value to be as low as 1%. These results were immaculate. It led to a system which had variations to a maximum of 4900 psi and 5100 psi on both sides. Low noise levels were an added advantage.   Another important Development with the upcoming of A380 is that they have incorporated four 150 kVa electrical generators which can be frequency controlled. Thus eliminating the use of constant speed drives (CSDs) and better reliability.  Embedded in the same electrical system are the new aluminium power cables that have replaced copper. Thus saving on weight for an aircraft that requires numerous cables running in it for such complex systems.  This power system of the A380 is fully digital and computerised. So the contractors and the breakers have been replaced by solid state devices for better performance. Extending discussion about the electrical power system of A380, it would be logical to mention the illumination system. The lighting is provided by the LEDs which have replaced conventional bulbs. These multi spectral LEDs are capable of producing day like effects anytime and producing shades of variable candela and contrast.   Fig5 components operating the hydraulic system (eaton, 2006) GROUND SERVICE PANEL: According to the fig.2, ground service panel is located at the foremost part of the aircraft in the hydraulic bay and is used for monitoring and maintaining the hydraulic system. Basically it consists of pressure and level gauges, to keep a check over the fluid levels and air pressurization. Fig.6 ground service panel (eaton, 2006) ENGINE DRIVEN PUMP: The main source of supplying 5000 psi is EDP, there are total eight Vickers branded engine driven pumps being installed on the airbus a380 and each being powered by the gear box, supplying the rate of flow of 160 l/min (42 gpm) at 3775 rpm.These pumps are based on clutch mechanism which enables them to disconnect from the engine gear box as required on flight or on ground. Fig.7 engine driven pump (EDP) (eaton, 2006) FIRE SHUT OFF VALVE: Four fire shut off valves being fitted in A380, in order to shut the hydraulic lines in case of major incidents or engine failure. The unit consist of an electrical motor, which has been designed specially for low electrical consumption, saving notable weight of the aircraft cables. Fig.8 fire shut off valve (eaton, 2006) SLAT DRIVE SYSTEM: This system consists of a hydraulic motor, sensors and brake release mechanism, where motor is bi- directional with variable displacement in nature and sensors are based on closed loop motor control mechanism. it is the first commercial aircraft, which uses this variable displacement motors to operate the secondary flight controls. Fig.9 hydraulic motor (eaton, 2006) HIGH PRESSURE MAINTENANCE FREE ACCUMULATOR: These accumulators are mostly used for maintaining the brake system of the jumbo jet during parking mode and also used as backup for emergency braking. They are charged with helium and can only operate with high pressure hydraulic fluid i.e. 5000 psi. Fig.10 high pressure accumulator (eaton, 2006) HYDRAULIC SLIDING UNIONS: These sliding unions are used for distribution of hydraulic power to different sections of aircraft such as rudder, elevators, landing gear etc. They are used for supporting pipe length during contraction and expansion, due to thermal changes and significant wing deflection. As shown in fig.2, they are located at rear spar area of the wings. Fig.11 hydraulic sliding unions (eaton, 2006) Highlights of new hydraulic system C:Usersswatinw sngsPictures380 10.jpg Fig.12 highlights of new system (bugatti) Electro hydrostatic actuators (EHAs)   These are for back up flight controls and are driven by mini pumps which are smaller that conventional pumps  but capable of delivering fluid at 5000 psi. Massive size of a380, brings out a new approach to its flight control system, moving these large surfaces hydraulically being proposed but later replaced by the new hydraulic plus electric architecture known as electro hydrostatic actuators. http://www.messier-bugatti.com/IMG/jpg/hmp0033n.jpg fig.13 mini pumps (bugatti) Hydraulic filtration and distribution   Its components are made of titanium so it can bear high pressures, being stronger and lighter in weight at the same time. Steering system To impart great manoeuvrability to the aircraft, Messier Buggati developed variable architectures to enhance the same. for example,   the nose wheel was managed by a software  Ã‚  IMA ( Integrated Modular Avionics) and a backup circuit of the type LEHGS (local electric hydraulic generation system) to support the main circuit for the nose wheel. The two rear wheels on each of the two central bogies are controlled by RDC (remote data concentrators) along with IMA. http://www.messier-bugatti.com/IMG/jpg/hs0013nblocorient_ra_a380-230-2.jpg fig.14 A380 steering system (bugatti) An application of the same is WABSIC  that  stands for  wheel and braking system integrated components  , it has two functions.one is to ensure the rotational speed of the tyre, other is to monitor the tire pressure through wireless data transmission. Moreover a brake cooling fan is part of this integrated unit. The same manufacturer Messier Buggati is responsible for the brake temperature monitoring system and oleo pressure monitoring system on the A380   Braking control system This is controlled by two main circuits fed by two hydraulic circuits, both operating at 5000 psi and monitored by the IMA software. The alternate system which uses de centralised  hydraulic system is also a full brake by wire system which is controlled by an analogue computer and has an emergency baking control unit (EBCU). landing gear hydraulic system As everyone knows that the world biggest airliner a380, has gained much of media headlines for building the jumbo jet with the hydraulic pressure of 5000 psi and they uses this pressure for operating their landing gear systems, which was a big challenge to work on. Maximum take-off weight of a380 is 560 tonnes, out of which 20 tonnes is only of gear itself. Landing gear retraction and extension system is the major element, which manages the landing gear of a380 having total of 22 wheels with 5000 psi. LGERS also introduces the new electromechanical uplocks, which are used for locking and the unlocking undercarriage bay doors and landing gears. These up locks can be used in normal mode as well as in emergency mode, but because of its weight they being replaced by the electromechanical actuators which are far more Compaq and cheaper as it eliminates the use of cable riggings which saves weight and cost as well. There are total 12 up locks being installed on a380, which are easy to maintain as it removes the need of bleed hydraulic system.

What is the Bubonic Plague? :: essays research papers

What is the Bubonic Plague?   Ã‚  Ã‚  Ã‚  Ã‚  The Bubonic Plague is a disease that is caused by a germ called Yersinia pestis. It is spread to humans by fleas from infected rodents. In the 1300s, fourth of the population of Europe was destroyed. The disease causes swelling of the lymph glands (up to the size of a hens egg). The Greek word for groin is boubon, which is bubonic. The number of reported human cases of this plague in the United States has increased since the 1960s because the environment isn't staying clean.   Ã‚  Ã‚  Ã‚  Ã‚  How do you get this disease? When a rat is infected, the flea bites the rat then the flea gets infected. The disease fills the stomach of the flea making it so the flea can't digest any more blood. The flea then becomes so hungry that it bites the human. Now the human is infected. The first symptoms are headaches, nausea, vomiting and aching joints. Some others are fever, chills, the most horrible: the skin turns black.   Ã‚  Ã‚  Ã‚  Ã‚  In the 1300s the plague spread so quickly in cities for many reasons. There were no regular garbage pick-ups. They let their food become rotten and kept them in their homes for weeks. Left over meals were thrown onto the ground for animals, also feeding rats and fleas. They had no running water, so bathing was every once in a while.   Ã‚  Ã‚  Ã‚  Ã‚  Galen's theory was that the disease was spread by poisonous vapors coming from swamps which corrupted the air. Heat was also believed to be a cause of the disease. People washed their feet and hands regularly but, not their bodies because this would open pores, another way for the disease to enter the body. Three Major Outbreaks   Ã‚  Ã‚  Ã‚  Ã‚  The first plague was the Plague of Justinian. The plague followed trade routes to France and Italy. It killed 70,000 people. It killed 1,000 people weekly. Smaller out breaks occurred up until 1340.   Ã‚  Ã‚  Ã‚  Ã‚  The second major outbreak was the Bubonic Plague. It was the most devastating. It occurred in Europe in 1346-50. The Bubonic Plague is also known as the Black Death. It began in Kaffa, a cathedral town on the Crimean Coast. By the end of 1348, the plague covered all of Italy and most of France. By 1351, the Plague reached Russia.   Ã‚  Ã‚  Ã‚  Ã‚  The third major outbreak was the Great Plague of London, in 1665 which killed 17,440 people out of the total population of 93,000. A fire burned most of the city and ended the outbreak. Human Cases   Ã‚  Ã‚  Ã‚  Ã‚  There have been cases of Bubonic Plague throughout the United States.

Physics Ia

Investigating Newton’s 2nd Law of Motion using an Air-track Introduction: My experiment is investigating the Newton’s 2nd law of motion by using an Air-track. The air-track can make the trolley frictionless by testing the velocity with different weights and shows that F=ma. Research question: How much acceleration does the frictionless trolley has? Aim: Use the air track to measure the acceleration of the no friction trolley by hanging with different mass of weights. Apparatus: * 1 air track * Weights (40g, 50g, 60g, 70g, 80g, 90g, 100g) * 1 string (bigger than 200cm) (plastic) 1 frictionless trolley (160g) * 1 pair of scissors * 2 sensors * 2 clamps * 1 ruler * 2 light gates * 1 Pulley * 1 data logger Variables: Independent: the mass pulls down the frictionless trolley. Dependent: the time taken when the frictionless trolley travel through two light gates. Fix: the distance of the light gates and the height of the light gates. Uncertainties: The strength of the plastic string after pulling a lot of weights. Procedure: 1. Put two light gates 50 cm between each other, the lights gates hanging by the clamps. 2.Hang the string one side to the frictionless trolley and another side on the hook which for hanging the weights. 3. Put the string on the wheel. 4. Put the frictionless trolley on the air-track at the distance of 170 cm. 5. Hang 40 g weights on the hook. 6. The frictionless trolley move forwards by the weights. The light gates will automatically recording the speed of the trolley takes and record down the data on the data logger. 7. Repeat the lab 5 times and do with other weights 50g, 60g, 70g, 80g, 90g, 100g as the same procedure. Diagram: Out line (not to scale): How the air track works:Air track is a device use for study motion in low friction environment. The air pump out of the small holes on the track and that allows the trolley got lifted and frictionless. Data Table: Conclusion The newton’s second law is the rate of change of m omentum of a body is directly proportional to the unbalanced force acting on the body and takes place in same direction. It’s according to my lab that the trolley is moving in one direction. Also the graph shows the a curve which shows the change of momentum is directly proportional to the unbalanced force olley. acting on the t

Millers Crossing essays

Miller's Crossing essays In the opening sequence of Millers Crossing, Johnny argues that he has every right to kill Bernie Bernbaum, a fellow bookie who Johnny claims is selling information about fixed fights to outside sources. Johnny discusses his reasoning behind his wish to kill Bernie with Leo, another crime leader who somehow holds a power over Johnny. Johnny begins by stating that he is going to talk about friendship, character, and ethics. He goes on to describe how he sometimes cheats by fixing a fight-but maintains that Bernie goes a step further by selling the inside information to outside sources, and is making a profit off of it. The fact that Bernie betrays him, and that in addition is making money off of it, angers Johnny because he believes that it consequently leaves him in the jungle-or in other words, that it reduces him to a normal civilian level. As the master of his domain, the lead of his own crime agenda, Johnny is not used to this feeling of being among the people that bet on chance, and he does not want to be at this level. He is used to getting his own way and winning, and thus is searching for any scapegoat to crucify as the cause of all his misfortune. Johnny declares two pieces of evidence to back up his accusations; first, that out of town money comes pouring in as bets for the fights, and two, that the odds of the fixed fights go straight to hell. As the opening confrontation between he and Leo progresses, Johnny continues in his angered reproach of Bernie and gets more and more animated as he tries to convince Leo to arrange the killing. Leo denies the reasoning behind Johnnys wish, and Johnny is in turn frustrated at Leo. Evidently, Leo and Johnny are leaders of separate crime rings, and Leos ring is currently on top. Leos blas demeanor only eggs Johnny on more, as he bellows that he doesnt need to listen to Leo, and storms out of the room, becaus...

Charles Law Example Problem

Charles Law Example Problem Charles law is a special case of the ideal gas law in which the pressure of a gas is constant. Charles law states that volume is proportional to the absolute temperature of a gas at constant pressure. Doubling the temperature of gas doubles its volume, so long as the pressure and quantity of the gas are unchanged.  This example problem shows how to use Charles law to solve a gas law problem. Charles Law Example Problem A 600 mL sample of nitrogen is heated from 27  °C to 77  °C at constant pressure. What is the final volume?Solution: The first step to solving gas law problems should be converting all temperatures to absolute temperatures. In other words, if the temperature is given in Celsius or Fahrenheit, convert it to Kelvin. This is the most common place mistakes are made in this type of homework problem.T K 273  °CTi initial temperature 27  °CTi K 273 27Ti K 300 KTf final temperature 77  °CTf K 273 77Tf K 350 KThe next step is to use Charles law to find the final volume. Charles law is expressed as:Vi/Ti Vf/TfwhereVi and Ti is the initial volume and temperatureVf and Tf is the final volume and temperatureSolve the equation for Vf:Vf ViTf/TiEnter the known values and solve for Vf.Vf (600 mL)(350 K)/(300 K)Vf 700 mLAnswer:The final volume after heating will be 700 mL. More Examples of Charles Law If Charles Law seems irrelevant to real life situations, think again! Here are several examples of situations in which Charles Law is at play. By understanding the basics of the law, youll know what to expect in a variety of real-world situations. By knowing how to solve a problem using Charles Law, you can make predictions and even start to plan new inventions. If you take a basketball outside on a cold day, the ball shrinks a bit as the temperature is decreased. This is also the case with any inflated object and explains why its a good idea to check the pressure in your car tires when the temperature drops.If you over-inflate a pool float on a hot day, it can swell in the sun and burst.Pop-up turkey thermometers work based on Charles law. As the turkey cooks, the gas inside the thermometer expands until it can pop the plunger. Examples of Other Gas Laws Charles law is only one of the special cases of the ideal gas law that you may encounter. Each of the laws is named for the person who formulated it. Its good to be able to tell the gas laws apart and cite examples of each one. As automobile tires heat up during driving, their pressure increases. (Amontons Law: Doubling temperature doubles pressure at constant volume and mass.)When you blow bubbles underwater, they expand as they rise to the surface. (Boyles Law: Doubling pressure halves volume, at constant temperature and mass.)Inhaling fills the lungs with air and expands their volume. (Avogadros Law: Doubling the mass or number of moles of a gas doubles the volume at constant temperature and pressure.)

Analysis on efficiency of Chinese commercial banks Research Proposal

Analysis on efficiency of Chinese commercial banks - Research Proposal Example A series of banking reforms have been implemented in China since 1979. These reforms aim to create a safe and sound system of banking within the country (Dong, 2009). The structural and institutional arrangements characterizing the banking sector in China as well as the banking reforms implemented in China in the past 20 years will provide the background and foundation of the study(Dong, 2009). The researcher felt that for efficiency to be discussed in-depth, it may be necessary for historical antecedents and facilitators of the same to be analyzed in order to provide the reader with a wealth of information. In the last 40 years, financial sectors across the globe have witnessed substantial developments(Dong, 2009). The change in the operating environment of banks has had significant implications for the business activities of banks as well as their economic role. Globalization, deregulation, technological progress and financial innovation to mention but a few have all gradually reduced the cost of processing and transmitting information which have been major forces impacting the performance of the international banking sector. Since the embarking of the open door policy in 1979, the Chinese banking sector has witnessed gradual yet notable reforms(Dong, 2009). A key objective of the said reforms implemented by the government was to build a competitive, effective and stable banking system to improve reliability and efficiency. The reforms aimed at moving the country from a planned economy supplemented with market elements to a socialist market economy. The Chinese government deregulated and liberalized operations in the Chinese banking sector as part of national reforms in the economy. The program applied includes among others the establishment of a double-tier system, separation of the lending policy form commercial

College drop-outs Essay Example | Topics and Well Written Essays - 750 words - 1

College drop-outs - Essay Example It is very difficult for an average student to afford education in a good university. People start their journey of education with a hope to get higher education one day. But by the time they reach that stage, they find their pockets too empty to even think about that. This becomes the cause of drop-outs for a lot of students. This is, indeed, a very unfortunate thing that someone who is capable of studying cannot study only because they don’t have money. There are some students who take loans to afford their education, but they go through a very tough and demanding experience emotionally, psychologically, and physically. Homesickness is a common reason for the drop-out from colleges, both among the native and the international students. Most of the 21.8 million students attending colleges and universities in America would be leaving their homes to explore a new environment, develop new relationships, and do everything by themselves; â€Å"More than a few of those students wi ll suffer homesickness, which can turn into depression, low motivation, insomnia, stomach aches and loneliness -- and their dropout rates are three times higher than non-homesick students, according to one 1993 study† (Lorenz). Native students living in hostels to save the cost of having to move from home to university every day have to live away from their families. Not only do they have to cope with homesickness, but they also have to deal with a lot of other challenges like bullying. A hostel, in no way, compares to a home in terms of environment. There are a lot of distractions in hostels. Young boys and girls form groups and gangs and tend to bully a certain student. The student finds it very difficult to deal with such groups, and eventually drops-out. Things are no less tough for the international students who have come from different countries to study in a certain university. International students also have to deal with many more problems in addition to homesickness; they have to find suitable accommodation and work in order to be able to manage their expenses. They miss their families back home. Those among the international students who cannot deal with all these challenges simultaneously eventually drop-out of colleges. In order to pay the college fee, many students work. This is typically observed among the international students. They come from underdeveloped and developing countries in search of better educational and life opportunities. Their parents are not that rich to pay their fees. Knowing that they have to manage everything by themselves, most international students work along with studying. Most of the times, they find menial jobs like dishwashing and when it comes to pay, every hour counts. They feel obliged to work as many hours as they can in order to be able to earn more. They face a lot of problems trying to manage work with education. Gradually, they realize that even if they drop-out but continue with their work, it would n ot only make their life easier, but would also lend them an opportunity to settle down in the foreign country. They also realize that they are earning more than they possibly can in their native countries. Hence, many international students drop-out of the colleges. Concluding, drop-outs are commonly observed among students of all ages in general and the ones in higher education in particular. While there are many causes of drop-outs, some of the prominent causes include

Mathematics Project Based & Game Based Learning vs. Traditional Dissertation

Mathematics Project Based & Game Based Learning vs. Traditional Repetition Learning - Dissertation Example Bouris, Creel and Storz (2004) state that the game based approach is an innovative approach of teaching Mathematics. It involves the use of games and technology. The method entails both simple tasks and difficult tasks, which are done individually or in groups. Traditionally, people learned mathematics through memorization of mathematical concepts as teachers demonstrated procedures in class. After the lesson, a teacher would give students homework based on the concept covered in class. This mode of learning advocates memorization of Mathematical concepts by the students (Bouris, Creel and Storz, 2004). Certainly, math skills required for students to function effectively in the 20th century are completely different than present skills requirement, hence the need to change the way mathematics as a subject is taught. Presently, there is an ongoing debate as to the best way to effectively teach mathematics and whether the traditional method is still effective. The present study will see k to compare Project- Based Learning (PBL) and Game-Based Learning (GBL) with the Traditional Repetitive Learning (TRL) to determine the most effective method of teaching mathematics. Significance of the Study Following increased pressure by the United States Department of Education, as well as the state of Tennessee Department of Education on mathematics teachers to enhance students’ mastery of mathematics as a key subject; teachers are increasingly adjusting their teaching methods to help improve students understanding of the subject. However, to some mathematics educators, the focus of academic achievement never goes beyond classroom and quizzes given to students. This notion has created an environment that continues to bar students from appreciating the applicability of mathematics to real-world problems (Afari et al., 2013). Even though continuous research has been done on teaching mathematics, little has been done on the effective methods of teaching the subject. Previo us researchers have tried to prove and provide evidence that mathematics is a critical subject for societal development while others sought to establish students’ performance in this subject. For instance, in 2012, the US Department of Education found that 8th grade students from the US were ranked 24th out of 29 countries in mathematics literacy. This was a clear indication that there was a big problem in the way mathematics as a subject was taught. Compared with other students from countries where PBL and GBL teaching methods had already been implemented, the US students’ scores were found to be low. Such low test scores and considering the impact of using different approaches when teaching mathematics, led to this study that seeks to establish the effectiveness of PBL, GBL and TRL approaches of teaching mathematics. This study will be conducted at Pine Elementary School which has a total population of 747 students. Departing from other previous researches that sough t to compare performance in mathematics relative to other subjects, this study will focus on effective teaching approaches that can enhance students’

Body Art and Ornamentation Essay Example for Free

Body Art and Ornamentation Essay There is no culture in which people do not, or did not paint, pierce, tattoo, reshape, or simply adorn their bodies (Schildkrout, 2001). Throughout history, body art and ornamentation has become a worldwide phenomenon and has played a key role in our lives, yet there is a social stigma which we cannot seem to rid ourselves of. It is most commonly misunderstood and misinterpreted which can be attributed to the fact that the symbolism and significance of the body art and/or ornamentation doesn’t always translate the same among the cultures. Although Western culture views body art and ornamentation as being associated with mischief and rebellion, Japanese and African cultures use it as a way of expressing spirituality as well as cultural expression. The existence of body art and ornamentation can be traced all the way back thirty thousand years or more back to when cavemen drew pictures on the cave walls. According to Kuhn Stiner (n.d.), the alteration and enhancement of one’s body originated from the Kapthurin formation in Kenya. Anthropologists even believe that body art and ornamentation was present during the Middle Pleistocene in both Eurasia and Africa. Expression and art are two factors that play a fundamental part in African culture. According to Clarke (2006), many African societies symbolically view body art and ornamentation as a special role in guiding one’s destiny and success, mediating between world of the living as well as the spiritual world, expressing community ideals, defining power and leadership, protecting and healing, and celebrating or commemorating the cycles of life, human and agricultural. African culture uses a variety of ways to display their body art and ornamentation depending on which society they live in. These ways include: incorporating shells, teeth, or claws into their clothing or jewelry, wearing colored body paint, exaggerating human features (i.e. elongation of the neck), gauging piercings in the ears and/or lip, scarification, and tattooing. Looking from another culture’s perspective, the various forms of African body art and ornamentation are seen as being weird, out of the ordinary, and we don’t understand the importance they hold within these African cultures. On the other hand, there are other cultures such as the Japanese, who instead of outwardly portraying their body art and ornamentation will instead conceal it so it won’t be visible at all. The first signs of body art and ornamentation which appear in the Japanese culture were first noted as originating all the way back to AD 297 (Rapp, 2010). Back then, tattoos would signify which occupational group certain men belonged to and men, both young and old, would get tattoos all over their bodies including their faces. Men would even go as far as getting full body tattoos which could be found on laborers, firemen, and gangsters (Hopkins-Tanne, 2000). The Chinese considered all Japanese tattoos an act of barbarism and was perceived as being extremely negative. The body art and ornamentation that exists and has existed within the Japanese culture spreads beyond just tattooing and there are a few other methods that they used. First, many married Japanese women or courtesan in the 10th through 19th centuries would apply a paste to their teeth which would blacken them (Schildkrout, 2001). This was considered as being beautiful as well as sexually appealing to where as we would vi ew that as abnormal and ugly. Secondly, they would bind the women’s feet in order to make them smaller and the process was extremely excruciating, but again, it was considered as being beautiful. The pain that was felt and the blood that was shed served as an offering to the gods, ancestors, and spirits (2001). On the other end of the spectrum, culture within the United States has a split view regarding body art and ornamentation. In the United States, forms of body art and ornamentation can include: tattoos, piercings, branding, corseting, scarification, gauging the earlobe, make-up, plastic surgery, and dental implants (Schwarz, 2006). We live in a society where we idolize and preach the importance of physical attractiveness. In doing so, there is the separation of individuals into five different groups that exist within the social structure. The five groups include: the conformist group, the innovators, ritualists, retreatists, and the rebellion group (Rapp, 2010). The conformist group consists of individuals who understand and accept the emphasis on the beauty of the body in its natural state and the only type of body art or ornamentation that’s used is superficial . On the other hand, the individuals who are classified as innovators accept the whole concept of the beauty of the natural body, but go to the extremes to achieve this. The individuals who refuse to conform to what society has deemed as beautiful yet maintains a natural body and stays within certain bounds regarding body art and ornamentation. Retreatists include individuals who don’t abide by the guidelines of proper hygiene as well as body art and ornamentation and won’t acknowledge the beauty of the natural body. Lastly, there are individuals who are set out to change the social structure and bring about a new phase of body art and ornamentation and they make up the rebellion group (2010). Nowadays, in American culture we see body art and ornamentation, such as tattoos and piercings, as being acceptable as well as fashionable. It’s not uncommon to see people have a variety of body art, ornamentation, and body modification performed. The majority of people go and get tattoos when they experience a pivotal point in their lives as well as trying to create a sense of identity for themselves. Everyone tries to be original in their own way, but the end result is the creation and growth of conformity. By this, I mean that everyone is going out and getting tattoos, piercings, or plastic surgery and they’re trying to be â€Å"original†, but when all is said and done, they begin to blend in with one another. No matter what people say or do, a stigma has remained attached to all the various kinds of body art and ornamentation. According to Schwarz (2006), tattoos continue to not be entirely accepted and are a barrier to the economic success which is central to the â€Å"American dream†. For example, most employers have rules for their employees stating that they cannot have any visible tattoos and/or piercings that are visible to the public. This could be partly because there are individuals that could be offended and businesses could suffer from a loss of customers and sales. In the American culture, tattoos are not acceptable in a number of situations esp ecially when it has to do with the general public (2006). The highest percentage of the American culture that has body art and ornamentation can be found in the younger generations. Many teens go through a period in their lives where they feel the need to rebel against the social norm especially to spite their parents. Their choices of body art and ornamentation are indicative of their attitudes and values (Crapo, 2013). Attitudes are statements of one’s preferences while values are what we consider good or bad (2013). This plays into why certain individuals look down upon body art and ornamentation and end up enforcing the negative stigma. In conclusion, the implementation of body art and ornamentation is a designated way of indicating the various cultural differences that exist within cultures worldwide. The main reason there has been the rise in the popularity of body art and ornamentation is a result of cultural commercialism. Despite how hard we try to eliminate the soci al stigma of body art and ornamentation, it will never completely be gone. Unfortunately, we can’t have everyone’s personal opinion be the same as one another, but there is one thing that we can do. We can make the effort to educate the various cultures on one another so that we are able to comprehend the vocabulary that is used, the meaning of symbols, myths and legends, and social values. People in different cultures continue focusing on the negative aspects of body art and ornamentation, but if we were able to understand one another, the idea of peace on earth isn’t that far out of reach. References Clarke, C. (2006). The art of africa: A response for educators. The Metropolitan Museum of Art. Retrieved from Ebscohost database Crapo, R.H. (2013). Cultural anthropology. San Diego, CA: Bridgepoint Education Hopkins-Tanne, J. (2000). Body art: Marks of identity. British Medical Journal. doi: 320(7226):64 Kappeler, P., Stahl, J., Wohlrab, S. (2006). Modifying the body: Motivations for getting tattooed and pierced. Science Direct: Body Image 4, 87-95. Retrieved from http://www.sociodep.hku.hk/bbf/BBF%20Readings%20W12/W12%20Modifying_the_Body.pdf Kuhn, S.L. Stiner, M.C. (n.d.) Body ornamentation as information technology: Towards an understanding of the significance of early beads. Retrieved from http://courses.washington.edu.archyaec/archy401/readings/kuhn-beads.pdf

Analyzing What Boudicca Is

Analyzing What Boudicca Is Though the primary sources on Boudicca are fragmentary and limited, it can still be ascertained that she played a major role in the revolt of the Iceni against the mighty foreign power of Rome. Throughout history powerful men have been viewed as threatening, but powerful women such as the late queen of the Iceni are often seen as awe-inspiring. Owing to Boudiccas mistreatment and bravery she rose up against the Roman Invasion endeavouring to seek vengeance and in doing so shaped European history. Boudicca, one of historys most powerful women, suffered rape only vicariously as a mother, but her revenge destroyed thousands. The rebellion of Boudicca has an established and monumental place in British history. Her ability to recruit a brutal Celtic army and massacre thousands in her revolt displays her courage and determination as a leader. The character of this woman and the events of her life, contribute immensely to her importance in history. While over time she has been viewed by dif ferent perspectives, she is most commonly seen as the obvious; a queen, mother, wife and survivor. Boudiccas revolt against the Romans was initially shaped by misfortunes brought upon her life and her family. Among ancient Celts, women were equal to men and held a number of well established rights. Consequently, when Boudiccas husband, Prasutagus, King of the Iceni tribe met his death in 60 AD, Boudicca took her assumed role as Leader and queen. Her husbands will outlined Boudiccas inheritance of the tribe and its land yet the Romans considered this practise illegal and demanded she hand over her wealth and territories. The injustice of such a demand resulted in Boudiccas strong refusal which ultimately led to her arrest, flogging and then the public brutalisation and rape of her two young daughters. Tacitus, senator and historian of the Roman Empire depicted the event in his work, The Annals. He states, His kingdom was plundered by centuries his wife Boudicca was scoured and his daughters outrage. All the chief men of the Iceni as if Rome had received the whole country as a gift, were stripped of their ancestral possessions, and the kings relatives were made slaves.(http://classics.mit.edu/Tacitus/annals.html). This prominent historian outlines significantly the atrocious actions of the Roman Empire and mistreatment of the Royal Family and its tribe. Manifestly, after the assault to her children, her family and her kingdom, it was time to seek vengeance. Boudicca triumphed as courageous female leader and despite the fragmentary nature of sources; there is strong historical evidence which depicts her heroic qualities. In the case of Boudicca, the public lashing she received and the rape of her daughters was a calculated political move on the part of the offending Romans, whose intent was to show the Celts their helplessness against the conquerors. For years Celtic tribes had suffered under roman domination and taxation. They had been driven off their own land and subject to lives as slaves and prisoners. After suffering yet enduring such great offences, Boudicca recruited neighbouring Celtic tribes which without a doubt strongly supported the revolt. Tacitus articulated that even neighbouring tribes which had not yet been cowed by slavery agreed in secret conspiracy to reclaim Celtic freedom. (Annals, 14,31). Cassius Dio, a Roman historian, could not overlook the magnanimity of Boudicca as he romantically depicts her in his literature when he displayed, She was huge of frame, terrifying of aspect, and with a harsh voice. A great mass of bright red hair fell to her knees: she wore a twisted Torc, and a tunic of any colours, over which was a thick mantle, festered by a broach. Now she grasped a spear to strike fear into all that watched her.(www.unc.edu). Without question, Boudiccas larger than life reputation, courageous persona and frightening stance was clearly recognised and depicted strongly in Roman history. Her ability to inspire support from neighbouring tribes in her vengeance in seeking to revolt made her a leader in her own right. Her final speech to her army, retold by Tacitus, displays the motivations of the Celts. Boudicca stated, Roman lust has gone so far that not our very person, nor even age or virginity, are left unpolluted If you weigh well the strength of the armies, and the causes of the war, you will see that this battle you must conquer or die. This is a womens resolve; as for men, they may live and be slaves, and captive.(www.unc.edu). Boudicca expresses that she would rather die than let herself and her tribe fall under the control of the Roman Empire. It is articulated that Boudicca saw the battle as life or death and that women will fight to the very end in the name of vengeance. Despite the fragmentary nature of the sources surrounding Boudicca, it is still evident that her efforts to build and motivate her army display her impact and inspiring leadership qualities. After the rape of her daughters, her own lashing and the outright theft of Iceni lands, Boudicca inspired an army of some 100,000 to break out from the oppression of the Roman Empire. Those who rose up against the Romans were few and far between. Perhaps the most significant factor is that the Roman Legions were far away from the Iceni Lands when the uprising occurred. Roman Governor Suetonius and his army were on the island of Mona and his march would take considerable time to intercept Iceni plans. Consequently, Camulodunum, Romans centre of rule, was attacked by Boudiccas troops and burnt to the ground. With little resistance in Boudiccas path, her army marched on to Londinum which suffered largely the same result as Camolodunum. Boudiccas army slaughtered the Roman people mercilessly. Inspired by vengeance the army marched on. Governor Suetonius described by Tacitus as an officer of distinguished merit, received news of the revolt and gathered 10,000 legionaries and marched them to stop Boudicca in her path of destruction. The exact location of the final battle is unknown but Boudiccas tribe were confident in their triumph against such a small Roman army. What the Iceni army did not have was militaristic training like the Roman soldiers did. Suetonius positioned his army on a hill leaving Boudiccas army to fight uphill, tired and hungry. Cassisus Dio described the Iceni as a swelling army in a battle that lasted all day with Boudicca sending wave after wave of Celts. (www.womenshistory.about.com) Tacitus gives an account of the final battle and tells of the women running around frantically, hair wild, naked and screaming, The Celtic chief was adorned to barbaric splendour with highly ornamental shields of armour. (www.conquest.caeraustralias.com.au) Boudicca was again presented in a heroic light yet her tribe was depicted as unhuman and unsophisticated. This is evident bias as the Romans stood for order and military discipline. Consequently, Boudiccas army were brutally defeated. Boudicca escaped with her daughters and it is believed that they ended their lives with poison to escape punishment and having to submit to the hands of Roman Rule. The Celtic tribes were hopelessly outmatched in militaristic methods yet they represented tradition and religion. Boudicca led a rebellion which literally and metaphorically set Roman Britain ablaze, but in doing so guaranteed the destruction of her people. Regardless of the fragmentary nature of the sources, Boudiccas influence is clear yet her fame in British and Roman history somewhat outweighs her achievements. Cassius Dio expresses the impact of Boudiccas revolt as he highlights, A terrible disaster occurred in Britain, Two cities we sacked, eighty thousand of the Romans and their allies perishedMoreover, all this ruin was brought upon the Romans by a women, a fact which in itself caused them the greatest shame. (M.J.Trow, 2005). Boudicca had clearly made a significant impact, but perhaps the most history making aspect of the revolt was the simple fact that its leader, Boudicca, was a female. Cassius continued to make reference to Boudiccas gender as he articulated that she possessed greater intelligence than what often belongs to a woman. (S.Busby, 2006). The shock to the Romans that a woman caused such a large uprising was evident and contributed greatly to her eminence. In contemporary times, Boudicca, warrior Queen of Iceni, is regarded as a heroine, a leader who stood her ground against foreign invasion. The misfortunes brought upon Boudicca and her tribe resulted in her vengeful seeking war against the Romans. The significant events which destroyed thousands of Romans, is a clear exemplar of her courage and leadership qualities. Despite fragmentary sources she rose as a strong female leader recruiting an outsized army. Her gender along with her achievements contributed immensely to her eminence and important place in history. Her name and history will constantly serve as a brutal yet remarkable reminder of Britains past.

Old Age in An Old Mans Winter Night and Follower Essay -- Robert Fros

Old Age in An Old Man's Winter Night and Follower This poem has a very direct title which intices the audience to find out more and is very similar to that of a Hollywood movie and uses plain language. From the 1st line we can see the boy’s possessiveness of his father from the words â€Å"My† we also know it is referring to the past from the tense of the word â€Å"worked† we also find out that he works on a farm. In the next 3 lines we can see the poets admiration for his father by the way he talks about the size of the man â€Å"globed like a full sail strung† and his strength. We see that his father was a real expert at his job by the way he can control horses with his tongue, heaneys intention was to show us the mans expertise and how he was in full control, it also shows us how hard the horses were working for him. In the next stanza on the 1st line Heaney calls his father â€Å"an expert† then pauses for affect to let it sink in, this is to show us the mans power and also the pure admiration from his son. In the next 2 lines we are again told about how good he was at his job â€Å"sod rolled over without breaking† the language which is used almost makes it seem effortless for the man. In the next stansa we see Heaneys use of enjanment with a run on line â€Å"Turned around – And back into the land† which reflects the movement of the plough. In the 3rd line we can see his father â€Å"narrowed and angled at the ground† using only his skill, not instruments, this makes him appear very wise and we can see that the boy is once again admiring his skills. In the next stansa we can see how the boy is clumsy in comparison to his father â€Å"I stumbled in his hobnailed wake† we also see his clumsiness from the word â€Å"fell† in the... ...the old man and his quality of life. After reading both poems we are given 2 different views on old age by 2 different poets. In Robert Frosts a lot of pity is felt for the old age and the poet seems to be very concerned about the quality of life being lived by the old man, he sympathises with the loneliness and feels sorry for the old man. Heaney seems to have a quite a different view on old age and we almost feel as if he is annoyed at his father for not being able to care for himself now, he is frustrated that the man whom he always looked up to has now become frail and now follows him around opposed to when he was a child. Out of the 2 poems I prefer Robert Frosts â€Å"An Old Mans Winter Night† as I believe that it has much more meaning to it and it really gets into the life of the old man and gets sympathy from the reader and gets them involved.

The Importance of School Uniforms

School Uniforms: They are definitely to be worn School uniforms have long been a topic of debate between those who believe the public school system should offer personal freedoms and those who believe it helps provide an appropriate environment for learning. There are many reasons uniforms can be helpful in enhancing the student's learning experience. It helps if you look at these dress codes as you would a uniform for work, as school is a child's work. While uniforms may be costly for parents, they save money in the future with trends changing, laundry, and students can focus on learning.So unlike trying to catch up with the different season styles, you could say that uniforms are a timeless investment. Some students may find it difficult to find an outfit to wear in the morning, particularly females. But when you have a school uniform, you are provided with a relatively easy selection of what to wear to school. Uniforms help to change the attitude of those wearing them. Unlike regu lar clothing choices, you are not likely to pick on someone wearing the exact same thing as yourself. Many schoolyard fights have begun with someone making fun of someone else regarding the clothing they are wearing.Dressing nicely also helps students to â€Å"live up to their clothing. † There is an innate sense of decorum when we dress for success. People tend to act differently depending on the clothing they are wearing. By creating a uniform specifically designed for attending school, the attitude falls in line. When those clothes are on, it becomes as regular as putting on pajamas, so a brain knows it is time to focus and learn. If a student could choose their own apparel, could you even imagine the amount of laundry one’s parents would have to do?Consider this; a new pair of under garments, a shirt or blouse, shorts or jeans, possibly a jumper, some socks, and even some extra clothes for recreational activities, multiplied by every day of the week, and add in eve ryone else’s clothes! A lot of people have two, three or even four children so as you could imagine, this would be extremely unnecessary. School uniforms have the potential to save parents money on clothing. Plain uniform clothing is less expensive than the brands that middle and high school students like to wear. Furthermore, because there is no variety in a chool uniform, children who wear them need fewer outfits in their wardrobes. Having a uniform is popular in secondary and intermediate schools. Some people believe that primary schools should be included, and I agree completely. As mentioned before, kids and teenagers go through a lot of clothing. But could you imagine a little boy running around the playground ripping his new clothes? I believe that having a uniform would help teach children to respect their belongings. It also saves money down the track with trends changing constantly, and this can prove to be very costly for parents.Having a compulsory uniform represe nts the school as being tidy and disciplined, whereas mufti would give the impression of low standards. Uniforms should definitely be in schools all over New Zealand. They save time in the morning deciding what to wear and students can concentrate on the learning, instead of trying to impress others. They do not form as many problems with students and teachers do not have to deal with bullying or other negative comments. Uniforms are an all-around money and time saver. While some uniforms are not attractive they give the wearer a sense of equality. By Niki

Famous Picasso Quotes essays

Famous Picasso Quotes essays Printed in Ashton_Picasso on Art: A Selection of Views_ (Da Capo Press Inc., 1972), 51-53 In Picasso on Art a section is dedicated to Picassos views on those who imitated him and those that he imitated. My of his quotes show that he believed in the art of copying for himself as well as others. What does it mean, says Picasso, for a painter to paint in the manner of So-and -So or to actually imitate someone else? Whats wrong with that? On the contrary, its a good idea. You should constantly try to paint like someone else. But the thing is, you cant! You would like to. You try. But it turns out to be a botch...and its at the very moment you make a botch of it that youre yourself. (Parmelin, When reading this quote any artist would realize the importance of imitating. It is the realization that in order to make a work ones own he must first try to replicate a master, which, according to Picasso is a false hope. At the moment the imitator makes a mess of his replication, it is when he comes into his own as an artist. He has taken the work of another and made it his own. Another quote on Imitators: Ha! exclaimed Picasso, do you think I paint for those people at the Rotonde?... Its too bad if theyre still there, let them walk in their own shit. Since I now have All right! Disciples if you like. But disciples be damned. Its not interesting. Its only the masters that matter. Those who create. And they dont even turn around when you piss on their heels... (Georges-Michel, 1954, pages 94-95) In the beginning of this quote Picasso buys into the old saying that imitation is the greatest form of flattery. Now that he has this glory he paints only for himse ...

Car Design from 1950

Car Design from 1950 Introduction Car design is a way of making both outside and inside of an automobile in a style, which integrates shape of the car with its mechanical ability. Automotive design involves vehicle development in the way it appears which includes its ergonomics. The design elements are usually divided into three important areas: one is the exterior design, which involves the design in the proportion, shape and how the texture of the surface of the vehicle will look like. This design is done first through making drawings either manually or electronically.Advertising We will write a custom essay sample on Car Design from 1950-2000 specifically for you for only $16.05 $11/page Learn More Then there is the development of clay or digital model. The other aspect is in interior design which defines where parts such as doors, and seats, among others, are placed. This aspect emphasizes mainly on the ergonomics and the passengers comfort. It goes through the same procedur e as the exterior design of sketching, then designing the digital and the clay model. The last aspect in design is usually focused on trims along with its color. To achieve this, extensive research and development is usually involved. Discussion 1950s Cars Design The early 1950s gave rise to chrome on cars and stylists who influenced by ideas from planes and trains designed many automobiles. The 1950s saw emergence of the tail fin courtesy of Harley Earl who worked on aeronautical designs. The tail fin era was between 1957 and 1960. The tail fin and chrome were most regarded as the design, which gave some of the outlandish cars ever designed in this era. Another revelation came in 1955, when Ford designed its model, which they named Ford Thunderbird. It was quite complex with rear exhaust, windshield, and front grill with fixed turbines (Hulbert, 2010). Ford Thunderbird Convertible 1955 Source: Anythingaboutcars.com.Advertising Looking for essay on art and design? Let's see if we can help you! Get your first paper with 15% OFF Learn More Chrysler’s group designer by the name Virgil Exner was notable with his different style of cab forward also known as the Forward Look. An example of the Forward look design is a 1956 Plymouth Fury, as is shown in the picture below (Bell, 2003, p. 12). 1956 Plymouth Fury Source: Anythingaboutcars.com. General motor’s Harley Earl and Virgil Exner turned out to be very influential in this era. They competed with one another with tail fins that are more elaborate. Earl saw this as a ploy to marketing while Exner believed the fins helped the car while on the road. These fins were later on utilized to control cars in great speeds. In 1957, there was a new design called the Chevrolet Bel Air as shown in the picture below, which gives the extent to which the designers were willing to go (Hulbert, 2010). 1957 Chevrolet Bel AirAdvertising We will write a custom essay sample on Car Design from 1950-2000 specifically for you for only $16.05 $11/page Learn More Source: Anythingaboutcars.com. In 1959, the previous designs were replaced with the Cadillac Series 62. This design was fitted with fins that were over 1ft high, and it had bullet lenses at the rearwards. This was regarded as a design icon and rates highly among all time American classics (Jain, 2004, p. 2). 1959 Cadillac Series 62 Source: Anythingaboutcars.com. The above picture shows the design of a tail fin 1959 Cadillac automobile which came up at the height of the tail fin era. Earl later came up with iconic designs together with his group to create such designs as Auburn 851, among others. Advertising Looking for essay on art and design? Let's see if we can help you! Get your first paper with 15% OFF Learn More Auburn 851 Source: Anythingaboutcars.com. In 1959 saw a new design of Cadillac Cyclone, which was a fantasy of a rocket like, it, had a wheelbase of about 104 inches. It had an independent suspension and a top of clear plastic. It was coated inside using vaporized silver that it can resist sunrays and had electric sliding doors. 1959 Cadillac Cyclone Source: Anythingaboutcars.com. 1960s During this era, focus was shifted to vehicle speeds and acceleration as well as engine size. The designs that were available included Ford Mustang, Chevrolet Camaro, and Dodge Charger. These designs were fitted with vents all over which had no purpose at all but for just mere appearance. The Dodge Charger had a fuel tank capacity of 7.2 liters. Chevrolet Source: Raizman Chevrolet Camaro Source: Anythingaboutcars.com. Ford Mustang In this same era, there was consolidating into the big three of General Motors, Ford, and Chrysler together with American Motors. These firms dominated both the global m arket and the domestic market. In 1961, General Motors introduced three models. One was the Oldsmobile Fs of the cars of this era include BMW M1, De Tomaso Pantera, Lamborghini Countach, and Lotus Esprit. The 1970s ushered in an interesting design, in angular box lines, which became a trait in style. This was again copied over into the 1980s. DeTomaso Pantera Source: Raizman. 1980s Cars Design The 1980s decade came with a trend of over indulgence, and the cars produced during this era were overpriced. It also witnessed the effects of materialism in that style was outdated, as most of the people wanted the expensive cars. The cars that were available at this time were the likes of Audi Quattro. Though it looked purposeful and powerful, it had no style and was not beautiful in shape. Another model was the Ferrari Testarossa, which was quite unfamiliar from the traditional Ferrari lines. Among the easily recognizable inclusions in designs of 1980s was incorporation of a hot hatch. In line with this, cars like Peugeot 205 along with Volkswagen Golf, which are both GTis started penetrating the market and were popular with the product named above (hot hatch) (Diseno-art., 2011, p. 1). Peugeot 205 GTi Source: Diseno-art.com. 1990s Cars Design The effects of the styling traits from the 1980s extended to some part of the early 1990s. Later on some interesting shapes began to come up which were very organic with appearance looking much powerful like the Dodge Viper. The Dodge Viper was made in a more look of an animal than a machine. In 1992, an Italian design house called Ghia extended the organic form to another level with shapes covering the car. The front face of this car model looked like a prehistoric animal. In 1995, another design came in Ford GT90; this design was clearly the reverse of Viper. This new model utilized edge design as its policy to create new model (Anythingaboutcars, 2011, p. 1). Dodge Viper GTS Source: Raizman. What the major point that chang e from the car design from 1950-2000 1950s The main changes in car design covered areas such as fuel efficiency and output of the engine. In 1950s, major changes that took place in car designs included jet designs, among others. This design made cars quite fascinating. 1960s This era saw the introduction of basic wedge profile. Later on, the engines of these cars were transversely mounted, and their bodies designed to support structural loads. 1970s This period saw introduction of a utility that combined luxury along with capability of four-wheel drive. Another additional change was the inclusion of electronic anti-lock braking system. This era had the most changes as it also saw design of restraint airbags, seatbelts, and traction control systems. In addition, the era also saw inclusion of computerized engine system. 1980s This era brought about the introduction of front-wheel drive cars along with compact cars, which had the advantage of being efficient in fuel consumption. This p eriod also saw the introduction of the two-box minivan design in 1983. 1990s This decade was quite memorable with the introduction of designs with hatchbacks. car bodies were designed to incorporate passengers as well as cargo. Explain how material culture has been designed and used as relational media on car development 1950-2000 Automobiles play an important role in life since they ease travelling; their introduction opened opportunities for people to transport goods and services. Development in car designs also encouraged subjective democracy since people could go to their places of choice. Moreover, Car development brought about power, style, and a way of identifying each other’s taste and style in society. Automobiles were much friendlier to the environment and were cleaner because it eliminated the animal waste in the streets (Raizman, 2003). Influence of car designs between 1950 and 2000 on political, economic, and social as well as culture climates Political Developme nt of automobiles has contributed greatly towards political change. This is due to increase in individualism and reduction of social interactions amongst people from diverse socioeconomic backgrounds. In addition, automobiles manufacturers urged governments to construct roads and conservatives have become more interested in promoting improvements in automobile industry (Raizman, 2003). Economic Developments in car designs have greatly influenced spreading of employment opportunities and planning of the city, among others. In addition, it has minimized rate at which people walk to work and use of railroads. Another area that has greatly benefited is infrastructure; this is evident in the increased number of good roads all over the world (Logix Microsystems Ltd., 2011). Social Social changes brought about by the effects of development in automobile industry include disconnection between communities due to reduced pedestrian-village interaction. It also brought less communication among st neighbors because they rarely walk unless it is for exercise reasons. Culture The developments of automobiles brought about ease in travelling from one place to another since it was more affordable and convenient. This was mainly in areas not accessed by railways. Another change brought about by automobile development is that it made people keener while walking across the streets. This growth also led to outward expansion of cities and development of suburbs. In addition, it encouraged people to live in less expensive areas, which are far from the city and encouraged interactions in neighborhoods. Another cultural change is in incorporation of automobiles in all aspects of life. These range from books to music as well as movies (Logix Microsystems Ltd., 2011). Which mutations of styles and idioms morphed and ensued The styles that are usually used in car design are quite varying and distinct in style of body design and its classification is not huge. The most common styles used a re four-wheel drive vehicle, which are designed in such a way that all the wheels receive engine power at the same time. Another style is called the convertible design, which has a folding roof that allows for an open roof while driving. Thirdly, there is the station wagon design, which has same height from both sides. Conclusion For the past few years, car designers have engaged in designing products for ideas. A smart car is one that can get instructions from a user and execute the information by itself. An example would be a smart car. There are two elements involved in car design; these include ensuring a balance in ergonomics as well as aesthetics. Car design is a field, which keeps on changing and can never be said to be predictable (Anything about cars, 2011, p. 1). Smart Car Source: Diseno-art.com. References Anythingaboutcars. (2011). The Fabulous 1950s Cars Here is Their Story. Anythingaboutcars.com. Retrieved from: anythingaboutcars.com/1950scars.html Bell, J. (2003). C oncept of Car Design: Driving the Dream. Rotovision. Retrieved from: https://www.google.com/search?q=Bell%2C+Jonathan+%282003%29ie=utf-8oe=utf-8aq=trls=org.mozilla:en-US:officialclient=firefox-a Diseno-art. (2011). From Concept Cars to Power Boats: Car Design History a brief overview. Diseno-art.com. Retrieved from: diseno-art.com/car_design_history.html Hulbert, L. (2010). Car Design: Car Designs of the 1950s. eHow.com. Retrieved from: ehow.com/list_7319746_car-designs-1950s.html Jain, S. L. (2004). Dangerous Instrumentality: The Bystander as Subject in Automobility. Cultural Anthropology 19 (1): 61–94. Retrieved from: http://onlinelibrary.wiley.com/doi/10.1525/can.2004.19.1.61/abstract Logix Microsystems Ltd. (2011). Car Designs: 1950-2009. carazoo.com. Retrieved from: carazoo.com/article/1410200901/Car-Designs:-1950-2009 Raizman, D. (2003). History of Modern Design. New Jersey: Prentice Hall Art.